PUR，Unspecified

PUR，Unspecified Tool-A-Thane UT-25 Urethane Tooling & Engineering Corp

Usages:
Molds molds tools general
Compare

Technical Data Sheet

elastomer	Test Condition	Test Method	Test Result
tensile strength	100%Strain		7.52 MPa
Permanent compression deformation	70°C,22hr		33 %
tear strength	Split	ASTM D470	11 kN/m
tensile strength	伸长率(Break)		450 %
	tensile strength	抗张强度		33.8 MPa
	tensile strength	tensile strength	300%Strain		15.2 MPa

mechanical properties	Test Condition	Test Method	Test Result
Wear resistance	NBS指数		175
Friction coefficient	Steel - Dynamic		0.68

thermal performance	Test Condition	Test Method	Test Result
Brittle temperature			-67.8 °C

Physical properties	Test Condition	Test Method	Test Result
Shrinkage rate	MD		1.5 %
density			1.06 g/cm³

hardness	Test Condition	Test Method	Test Result
Shore hardness	ShoreD		40
Shore hardness	Shore hardness	ShoreA		90

film	Test Condition	Test Method	Test Result
GravesTear			90.2 kN/m

Supplementary Information	Test Condition	Test Method	Test Result
Puncture intensity	推荐最佳寿命		25 %
BayshoreResistance-NBSIndex			50.0

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top