PLA Ingeo™ 6202D
44
- Properties:compostableUpdatable resourcesFood contact compliance
- Usages:Short fiberTextile applicationHousehold goodsFabric
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ASTM D1238 | 15 to 30 g/10 min | |
| Shrinkage rate | ASTM D2102 | < 8.0 % | |
| melt mass-flow rate | ASTM D1238 | 15to30 g/10min | |
| relative viscosity | 内部方法 | 3.10 | |
| Shrinkage rate | ASTM D2102 | <8.0 % | |
| MediumDensity | 1.08 g/cm³ |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Denier (fineness) | >0.500 | ||
| ElongationofFibers | ASTM D2256 | 10to70 % | |
| bending strength | ASTM D2256 | 2.50to5.00 g/denier |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Flexural modulus | ASTM D2256 | 30.0 to 40.0 g/denier | |
| ModuleElasticity | ASTM D2256 | 30.0to40.0 g/denier |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Glass Transition Temperature | ASTM D3418 | 55.0 to 60.0 °C | |
| Crystallization peak temperature | ASTM D3418 | 160 to 170 °C | |
| Glass Transition Temperature | ASTM D3417 | 55.0to60.0 °C | |
| Crystallization peak temperature | ASTM D3418 | 155to170 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top