ABS LUVOCOM® 1200-8493

Properties:
Filler
stainless steel fiber
Compare

Technical Data Sheet

physical property	Test Method	Test Result
Shrinkage rate	DIN16901	0.50到0.80 %
Water absorption rate		<0.50 %
density	ISO1183	1.19 g/cm³

Mechanical properties	Test Condition	Test Method	Test Result
Tensile modulus		ISO527-2	3000 MPa
Tensile stress	Break	ISO527-2	45.0 MPa
Tensile strain	Yield	ISO527-2	2.5 %
Flexural modulus		ISO178	2500 MPa
Bending stress		ISO178	65.0 MPa
Bending Strain		ISO178	3.0 %

Impact resistance	Test Condition	Test Method	Test Result
Impact strength of simply supported beam without notch		ISO179/1eU	25 kJ/m²

Electrical performance	Test Condition	Test Method	Test Result
Surface Resistivity		IEC60093	<1.0E+4 ohms
insulation resistance		IEC60167	<1.0E+4 ohms

Thermal performance	Test Condition	Test Method	Test Result
Continuous use temperature		UL746B	60.0 °C
Maximum operating temperature - SharrTerm			80 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top