Share
Add to compare

PEEK 550CA40 JILIN JOINATURE

21

Form:Granules | Grade:Injection grade

Product Description
Certificates(0)
Datasheet

Product Description

Certificates

No Data...

Technical Data Sheet

impact performanceTest ConditionTest MethodTest ResultTest Unit
Charpy Notched Impact StrengthISO 179/1eA9kJ/m²
mechanical propertiesTest ConditionTest MethodTest ResultTest Unit
Bending modulus23℃ISO 17830000Mpa
bending strengthBreak,23℃ISO 178390Mpa
Tensile strainBreak,23℃ISO 5271.4%
tensile strengthBreak,23℃ISO 527265Mpa
Shore hardness23℃ISO 86888D 级
thermal performanceTest ConditionTest MethodTest ResultTest Unit
specific heat23℃DSC1.8kJ/kg/℃
Linear coefficient of thermal expansion低于Tg沿着FlowISO 113595ppm/K
Linear coefficient of thermal expansion高于Tg沿着FlowISO 113598ppm/K
Glass transition temperature起始ISO 11357143°C
Melting temperatureISO 11357343°C
Physical propertiesTest ConditionTest MethodTest ResultTest Unit
melt mass-flow rate380℃,5.0kgISO 11334g/10min
Shrinkage rateTDISO 294-40.1%
Shrinkage rateMDISO 294-40.5%
Water absorption rateEquilibrium,23℃,3.20 mm厚拉伸棒ISO 62-10.3%
Water absorption rate23℃,24hr,3.2 mm厚拉伸棒ISO 62-10.03%
density结晶ISO 11831.44g/cm³
Electrical performanceTest ConditionTest MethodTest ResultTest Unit
Volume resistivity23 ℃,1VIEC 6009310^5ohms·cm
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.