Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| melt mass-flow rate | | ASTMD1238 | 2.0 g/10min |
| Shrinkage rate | | ASTMD955 | 0.0到0.20 % |
| Shrinkage rate | | ASTMD955 | 1.3到1.5 % |
| Water absorption rate | | ASTMD570 | 0.030 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | | ASTMD785 | 90 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| elongation | | ASTMD638 | 1.5 % |
| elongation | | ISO527-2/1A/5 | 1.5 % |
| Flexural modulus | | ASTMD790 | 16600 Mpa |
| Flexural modulus | | ISO178 | 24100 Mpa |
| bending strength | | ASTMD790 | 265 Mpa |
| bending strength | | ISO178 | 273 Mpa |
| compressive strength | | ASTMD695 | 127 Mpa |
| shear strength | | ASTMD732 | 84.1 Mpa |
| | ASTMD1894 | 0.34 |
| | ASTMD3702 | 0.45 |
| | ASTMD1894 | 0.12 |
| | ASTMD3702 | 0.070 |
| Tensile modulus | | ASTMD638 | 18300 Mpa |
| Tensile modulus | | ISO527-2/1A/1 | 25300 Mpa |
| Tensile stress | | ISO527-2/1A/5 | 197 Mpa |
| Tensile stress | | ASTMD638 | 161 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Suspended wall beam without notch impact strength | | ASTMD4812 | 530 J/m |
| Suspended wall beam without notch impact strength | | ISO180 | 43 kJ/m² |
| Filling analysis | Test Condition | Test Method | Test Result |
|---|
| Melt viscosity 2 | | ASTMD3835 | 380 Pa·s |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ASTMD648 | 299 °C |
| Glass Transition Temperature | | ASTMD3418 | 152 °C |
| | ASTMD3418 | 342 °C |
| | ASTME831 | 1.7E-05 cm/cm/°C |
| specific heat | | DSC | 1250 J/kg/°C |
| specific heat | | DSC | 1670 J/kg/°C |
| thermal conductivity | | ASTME1530 | 0.36 W/m/K |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices