Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792 | 1.26 g/cm³ |
| melt mass-flow rate | | ASTM D1238 | 23 g/10min |
| Shrinkage rate | | | 0.20 % |
| Shrinkage rate | | | 0.20 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Shore hardness | | ASTM D2240 | 71 |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| Adhesion to PA | | | 3.1 kN/m |
| elastomer | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ASTM D412 | 2.26 MPa |
| tensile strength | | ASTM D412 | 3.92 MPa |
| elongation | Break | ASTM D412 | 550 % |
| compression set | | ASTM D395 | 20 % |
| aging | Test Condition | Test Method | Test Result |
|---|
| Change rate of ultimate elongation in air | | ASTM D573 | 1.0 % |
| Change rate of tensile strength in air | | ASTM D573 | 6.0 % |
| Change rate of hardness (Shore) in the air | | ASTM D573 | 2.0 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| brittle temperature | | | -40.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare