PP Homopolymer Mafill® CR H 1044
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO1183 | 0.950 g/cm³ | |
| melt mass-flow rate | ISO1133 | 1.5 g/10min | |
| Shrinkage rate | 内部方法 | 0.90到1.3 % | |
| Ash Content | ISO3451 | 10 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ISO527-2 | 1600 MPa | |
| Tensile stress | Yield | ISO527-2 | 26.0 MPa |
| Flexural modulus | ISO178 | 1400 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ISO180/1A | 5.0 kJ/m² |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top