ABS 4H242000
0
- Properties:Improved impact resistance and moderate fluidity
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO 1183 | 1.05 g/cm3 | |
| melt mass-flow rate | ISO 1133 | 20 g/10min | |
| Water absorption rate | ISO 62 | 0.10 % | |
| Shrinkage rate | ISO 2557 | 0.40-0.60 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Flexural modulus | ISO 178 | 2400 MPa | |
| Impact strength of cantilever beam gap | ASTM D-256 | 100 J/m | |
| 150 | |||
| 200 | |||
| Tensile stress | ISO 527-2 | 40.0 MPa | |
| Tensile strain | ISO 527-2 | 50 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Compared to the Leakage Tracking Index (CTI) | IEC 60112 | PLC 0 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ISO 75-2/A | 90.0 ℃ | |
| vicat | ISO 306/B | 95.0 ℃ | |
| ball-indentation hardness | IEC 60335-1 | Pass | |
| UL flame retardant rating | HB | ||
| Hot filament ignition temperature | IEC 60695-2-13 | 650 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top