LDPE DOW™ PG 7008
39
- Properties:Product trademark DOW
- Usages:Food packagingFor injection molding grade
Compare
View PricesTechnical Data Sheet
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D-792 | 0.916 g/cm | |
| melt mass-flow rate | ASTM D-1238 | 7.5 g/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | ASTM D-638 | 9.00 Mpa | |
| ASTM D-638 | 10.00 Mpa | ||
| elongation | ASTM D-638 | 350 % | |
| Flexural modulus | ASTM D-790 | 200 Mpa | |
| Impact strength of cantilever beam gap | ASTM D-1822 | 145 KJ/m | |
| Shore hardness | ASTM D-2240 | 50 |
| Other performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Environmental stress cracking resistance | ASTM D-1693 | 9.20 hr |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| vicat | ISO 306 | 89.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top