Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792 | 1.84 g/cm³ |
| Water absorption rate | Equilibrium | ASTM D229 | 0.20 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Barcol Hardness | | | 46 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | V-0 |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| Temperature rating | | | 130 °C |
| Viscosity | | ASTM D229 | 10.3 MPa |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ASTM D638 | 68.9 MPa |
| Flexural modulus | | ASTM D790 | 6890 MPa |
| bending strength | | ASTM D790 | 145 MPa |
| compressive strength | | ASTM D695 | 207 MPa |
| shear strength | | ASTM D732 | 96.5 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTM D256 | 430 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Compared to the Leakage Tracking Index (CTI) | | | PLC 1 |
| dielectric strength | | ASTM D149 | 60000 V |
| dielectric strength | | ASTM D149 | 22 kV/mm |
| dielectric constant | | ASTM D150 | 4.40 |
| Dissipation Factor | | ASTM D150 | 0.019 |
| arc resistance | | ASTM D495 | 180 sec |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare