PET FR530 DUPONT USA

Form：Granules | Grade：Injection grade

Properties:

enhanceGlass fiber reinforcedwear resistantHigh rigidityHigh temperature resistanFiller: Glass fiber reinf30% filler by weight

Typical Applications:

Electrical fieldElectronic fieldHousehold appliancesHousehold appliancesAutomotive sector

Supplier(1)

Product Description

Certificates(2)

Datasheet

Alternative Model(1)

Product Description

Typical Applications:	Electrical field \| Electronic field \| Household appliances \| Household appliances \| Automotive sector
Properties:	enhance \| Glass fiber reinforced \| wear resistant \| High rigidity \| High temperature resistan \| Filler: Glass fiber reinf \| 30% filler by weight

Certificates

SGS

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	40	kJ/m²
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	40	kJ/m²
Charpy Notched Impact Strength	23°C	ISO 179/1eA	10	kJ/m²
Charpy Notched Impact Strength	Charpy Notched Impact Strength	-30°C	ISO 179/1eA	9.0	kJ/m²
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	0.35mm	UL 94	V-0
	UL flame retardant rating	1.5mm	UL 94	V-0
		UL flame retardant rating	0.35mm	IEC 60695-11-10,-20	V-0
		UL flame retardant rating	UL flame retardant rating	1.5mm	IEC 60695-11-10,-20	V-0
Extreme Oxygen Index		ISO 4589-2	33	%
FMVSS flammability		FMVSS302	DNI
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Bending modulus		ISO 178	10500	Mpa
Tensile creep modulus	1000hr	ISO 899-1	9700	Mpa
Tensile creep modulus	Tensile creep modulus	1hr	ISO 899-1	11200	Mpa
Tensile strain	Break	ISO 527-2	2.0	%
tensile strength	Break	ISO 527-2	135	Mpa
Tensile modulus		ISO 527-2	11500	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45MPa,Unannealed	ISO 75-2/B	243	°C
Hot deformation temperature	Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/A	225	°C
RTI Imp	1.5mm	UL 746	155	°C
	RTI Imp	0.75mm	UL 746	155	°C
	RTI Imp	RTI Imp	0.40mm	UL 746	155	°C
RTI Elec	3.0mm	UL 746	155	°C
	RTI Elec	1.5mm	UL 746	155	°C
		RTI Elec	0.75mm	UL 746	155	°C
		RTI Elec	RTI Elec	0.40mm	UL 746	155	°C
Linear coefficient of thermal expansion	TD：-40to23°C	ISO 11359-2	6.8E-05	cm/cm/°C
	Linear coefficient of thermal expansion	TD：--	ISO 11359-2	9.2E-05	cm/cm/°C
	Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	MD：-40to23°C	ISO 11359-2	2.2E-05	cm/cm/°C
Vicat softening temperature		ISO 306/B50	220	°C
Melting temperature		ISO 11357-3	252	°C
Linear coefficient of thermal expansion	MD：--	ISO 11359-2	1.9E-05	cm/cm/°C
RTI Imp	3.0mm	UL 746	155	°C
RTI Str	0.40mm	UL 746	155	°C
	RTI Str	0.75mm	UL 746	155	°C
		RTI Str	1.5mm	UL 746	155	°C
			RTI Str	3.0mm	UL 746	155	°C
			RTI Str	RTI Str	EffectiveThermalDiffusivity	UL 746	1.1E-07	m²/s
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	Equilibrium,23°C,2.00mm,50%RH	ISO 62	0.15	%
Water absorption rate	Water absorption rate	Saturation,23°C,2.00mm	ISO 62	0.75	%
Shrinkage rate	MD	ISO 294-4	0.20	%
Shrinkage rate	Shrinkage rate	TD	ISO 294-4	0.80	%
Melt Volume Flow Rate (MVR)	280°C/2.16kg	ISO 1133	6.00	cm3/10min
density		ISO 1183	1.68	g/cm³
Top out temperature			170	°C
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Relative permittivity	1MHz	IEC 60250	4.30
Dissipation factor	100Hz	IEC 60250	7E-03
Dissipation factor	Dissipation factor	1MHz	IEC 60250	0.013
Compared to the anti leakage trace index	CTI	UL 746	PLC 2
Compared to the anti leakage trace index	Compared to the anti leakage trace index		IEC 60112	PLC 3
Surface resistivity		IEC 60093	1E+14	ohms
Volume resistivity		IEC 60093	>1.0E+15	ohms·cm
Dielectric strength		IEC 60243-1	39	KV/mm
Relative permittivity	100Hz	IEC 60250	4.80

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top