Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792 | 2.35 g/cm³ |
| Shrinkage rate | | ASTMD955 | 0.78 % |
| Shrinkage rate | | ASTMD955 | 0.60 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | V-0 |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| breakdown voltage | | | >5000 V |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| bending strength | | ASTMD790 | 93.1 MPa |
| elongation | Break | ASTMD638 | 1.2 % |
| Flexural modulus | | ASTMD790 | 9450 MPa |
| tensile strength | | ASTMD638 | 47.1 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTMD256 | 27 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Surface Resistivity | | ASTMD257 | 1E+14 ohms |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ASTMD648 | 195 °C |
| thermal conductivity | | ASTME1461 | 1.5 W/m/K |
| thermal conductivity | | ASTME1461 | 5.0 W/m/K |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare