PP ADDILENE J 490 M40 S ADDIPLAST FRANCE

Properties:

Filler ADDIPLAST French ADDIPLAST

Typical Applications:

Industrial applications connectors electrical enclosures

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Industrial applications \| connectors \| electrical enclosures
Properties:	Filler \| ADDIPLAST \| French ADDIPLAST

Certificates

No Data...

Technical Data Sheet

mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength	Break，23°C	ISO 527-2	24.0	MPa
Elongation at Break	Yield，23°C	ISO 527-2	7.0	%
Charpy Notched Impact Strength	23°C	ISO 179/1eA	2.5	kJ/m²
Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	20	kJ/m²
Impact strength of cantilever beam gap	23°C	ISO 180/1A	2.5	kJ/m²
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	弹性模量	ISO 178	3800	MPa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	1.80MPaAnnealed	ISO 75-2/Af	69.0	°C
Vicat softening temperature		ISO 306/A50	152	°C
	Vicat softening temperature	发光线测试	CEI60695/2/1	960	°C
		Vicat softening temperature	Melting Temperature	ISO 3146/C2	165-168	°C
		Vicat softening temperature	Vicat softening temperature	氧指数	ISO 4589	23	%
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ISO 1183	1.34	g/cm³
melt mass-flow rate	℃/Kg	ISO 1133	12	g/10min
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dissipation factor	相对漏电起痕指数	IEC 60112	>=600	V
Volume resistivity		IEC 60093	>=1.0E+15	Ω.cm
Surface resistivity		IEC 60093	>=1.0E+13	Ω.cm
Dielectric strength		IEC 60243-1	42.0	KV/mm
hardness	Test Condition	Test Method	Test Result	Test Unit
Hardness (Shore A)		ISO 868	72
flame retardant performance	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating		UL -94	V-2	1.60mm

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top