Technical Data Sheet
physical property | Test Condition | Test Method | Test Result |
---|
density | | | 1.30 g/cm³ |
Apparent density | | ASTM D1895B | 0.15 g/cm³ |
MoistureContent-GSRF | | | 2.0to3.0 % |
ParticleSizeDistribution-D | | | <130.0 µm |
hardness | Test Condition | Test Method | Test Result |
---|
Rockwell hardness | M-Scale | ASTM D785 | 125 |
Shore hardness | | ASTM D2240 | 95 |
flammability | Test Condition | Test Method | Test Result |
---|
UL flame retardant rating | | UL 94 | V-0 |
Supplementary Information | Test Condition | Test Method | Test Result |
---|
weight loss on heating | | 内部方法 | 570 °C |
weight loss on heating | | 内部方法 | 520 °C |
Mechanical properties | Test Condition | Test Method | Test Result |
---|
Tensile modulus | | ASTM D638 | 5900 MPa |
tensile strength | | ASTM D638 | 160 MPa |
Compression Modulus | | ASTM D695 | 5900 MPa |
compressive strength | | ASTM D695 | 390 MPa |
elongation | | ASTM D638 | 3.0 % |
Flexural modulus | | ASTM D790 | 6500 MPa |
bending strength | | ASTM D790 | 220 MPa |
Impact resistance | Test Condition | Test Method | Test Result |
---|
Impact strength of cantilever beam gap | | ASTM D256 | 21 J/m |
Impact strength of cantilever beam gap | | ASTM D256 | 600 J/m |
Electrical performance | Test Condition | Test Method | Test Result |
---|
Surface Resistivity | | ASTM D257 | 1E+15 ohms |
Volume resistivity | | ASTM D257 | 1E+15 ohms·cm |
arc resistance | | ASTM D495 | 185 sec |
dielectric strength | | ASTM D149 | 23 kV/mm |
Thermal performance | Test Condition | Test Method | Test Result |
---|
Heat distortion temperature | | ASTM D648 | 440 °C |
Continuous use temperature | | UL 746B | 400 °C |
Glass Transition Temperature | | 内部方法 | 467 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.