PPS 1140A6 TAIWAN POLYPLASTICS

Form：Granules | Grade：Injection grade

Properties:

Glass fiber reinforcedHigh rigidityhigh strengthHigh impact resistanceFlame retardantHigh traffic

Typical Applications:

small home appliancesFitness equipmentElectrical fieldElectronic fieldAutomotive sectorsporting goods

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	small home appliances \| Fitness equipment \| Electrical field \| Electronic field \| Automotive sector \| sporting goods
Properties:	Glass fiber reinforced \| High rigidity \| high strength \| High impact resistance \| Flame retardant \| High traffic

Certificates

No Data...

Technical Data Sheet

mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Friction coefficient	VS.ltself-Dynamic	ASTM D1894	0.44
Poisson's ratio		ASTM E132	0.4
bending strength		ASTM D790	240	MPa
Bending modulus		ASTM D790	13700	MPa
elongation	Break	ASTM D638	1.7	%
Suspended wall beam without notch impact strength		ASTM D256	353	J/m
Impact strength of cantilever beam gap		ASTM D256	92	J/m
tensile strength		ASTM D638	186	MPa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	1.8MPa,Unannealed	ASTM D648	270	℃
UL flame retardant rating		UL 94	V-0
Linear coefficient of thermal expansion	垂直	ASTM D696	0.00007	cm/cm/℃
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	Flow	ASTM D696	0.000016	cm/cm/℃
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	24hr,23℃	ASTM D570	0.015	%
density		ASTM D792	1.67
Rockwell hardness	M-Scale	ASTM D785	100
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Arc resistance		ASTM D495	120	sec
Dissipation factor	1E+6Hz	ASTM D150	0.002
Dissipation factor	Dissipation factor	1000Hz	ASTM D150	0.002
Dielectric constant	1E+6Hz	ASTM D150	4.5
Dielectric constant	Dielectric constant	1000Hz	ASTM D150	4.5
Dielectric strength	3.00mm	ASTM D149	12	kV/mm
Volume resistivity		ASTM D257	1E+16	Ohm.cm
Surface resistivity		ASTM D257	8E+16	ohms

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top