
ABS DP M201AS Ineos ABS
Product Description
Certificates(0)
Datasheet
Product Description
Certificates
No Data...
Technical Data Sheet
| Basic Performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| density | ISO 1183 | 1050 | kg/m | |
| Melt Volume Flow Rate (MVR) | 220℃,10kg | ISO 1133 | 18.0 | cm |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Tensile modulus | ISO 527-1 | 2400 | MPa | |
| Tensile stress | Yield | ISO 527-1 | 47.0 | MPa |
| Tensile strain | Yield | ISO 527-1 | 2.5 | % |
| Fracture strain | ISO 527-1 | 0.00 | % | |
| Charpy Notched Impact Strength | 23℃ | ISO 179/1eA | 19.0 | KJ/m |
| -30℃ | ISO 179/1eA | 10.0 | KJ/m | |
| 23℃ | ISO 179/1eU | 140 | KJ/m | |
| -30℃ | ISO 179/1eU | 80.0 | KJ/m | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Linear coefficient of thermal expansion | ISO 11359-1 | 0.000090 | cm/cm℃ | |
| Hot deformation temperature | 0.45MPa | ISO 75-1 | 100 | ℃ |
| 1.80MPa | ISO 75-1 | 96.0 | ℃ | |
| Vicat softening temperature | 50℃/h 50N | ISO 306 | 97.0 | ℃ |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Dielectric loss | 100Hz | IEC 60250 | 0.0060 | |
| 1000Hz | IEC 60250 | 0.0080 | ||
| Dielectric strength | IEC 60243-1 | 32 | KV/mm | |
| Volume resistivity | IEC 60093 | 1E+13 | ohm.m | |
| Relative permittivity | 100Hz | IEC 60250 | 3.10 | |
| 1000Hz | IEC 60250 | 2.90 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.