PEI OP - PEI 1000 OXFORD USA

Compare

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result
density		ASTM 792	1.27 g/cm3

Mechanical properties	Test Condition	Test Method	Test Result
tensile strength		ASTM 638	103 MPa

	Test Condition	Test Method	Test Result
Shrinkage rate		ASTM 955	0.005-0.007 %
tensile strength		ASTM 638	103 MPa
Flexural modulus		ASTM 790	3241 MPa
bending strength		ASTM 790	145 MPa
Impact strength of cantilever beam gap		ASTM 256	1.0 ft.lb/in
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap		ASTM 3029	320 in.lb
melting temperature		ASTM 648	196 ℃
UL flame retardant rating		0.625in	V-0
UL flame retardant rating	UL flame retardant rating		0.125in	V-0
melt mass-flow rate		ASTM 1238	20 g/10min

Thermal performance	Test Condition	Test Method	Test Result
Heat distortion temperature		ASTM 648	204 ℃

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top