PBT Chiao Fu PBT PBT819G20 NAT TAIWAN CHIAO FU
0
- Properties:Fillerglass fiber reinforced material20%filler by weight
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D792 | 1.49 g/cm³ | |
| Shrinkage rate | ASTM D955 | <0.50 % | |
| melt mass-flow rate | ASTM D1238 | 20 g/10min | |
| ASTM D1238 | 20 g/10min | ||
| Shrinkage rate | ASTM D955 | <0.50 % | |
| density | ASTM D792 | 1.49 g/cm³ |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| UL flame retardant rating | UL 94 | V-0 | |
| UL 94 | V-0 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| elongation | Break | ASTM D638 | <5.0 % |
| Flexural modulus | ASTM D790 | 6470 MPa | |
| bending strength | ASTM D790 | 177 MPa | |
| tensile strength | ASTM D638 | 10.8 MPa | |
| bending strength | ASTM D790 | 177 MPa | |
| elongation | Break | ASTM D638 | <5.0 % |
| Flexural modulus | ASTM D790 | 6470 MPa | |
| tensile strength | ASTM D638 | 10.8 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256 | 59 J/m | |
| ASTM D256 | 59 J/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D648 | 205 °C | |
| RTI Elec | UL 746 | 75.0 °C | |
| Heat distortion temperature | ASTM D648 | 205 °C | |
| RTI | UL 746 | 75.0 °C | |
| RTI Imp | UL 746 | 75.0 °C | |
| RTI | UL 746 | 75.0 °C | |
| RTI Imp | UL 746 | 75.0 °C | |
| RTI Elec | UL 746 | 75.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top