PVC

PVC Karina BLACK PVC COMPOUND 70900-48/1-E-IS-LMP Karina Ind. e Com. de Plásticos Ltda

Usages:
Wire and cable applications electronic insulation
Compare

Technical Data Sheet

elastomer	Test Condition	Test Method	Test Result
elongation	Break	IEC 60811-1-2	>150 %
elongation	elongation	Break	IEC 60811-1-2	>150 %
tensile strength		IEC 60811-1-2	>12.6 MPa
tensile strength	tensile strength		IEC 60811-1-2	>12.6 MPa

mechanical properties	Test Condition	Test Method	Test Result
Tensile strain	Yield	IEC 60811-1-1	>150 %
tensile strength		IEC 60811-1-1	>12.6 MPa
Tensile strain	Yield	IEC 60811-1-1	>150 %
tensile strength		IEC 60811-1-1	>12.6 MPa

Physical properties	Test Method	Test Result
density	IEC 60811-1-3	1.44to1.50 g/cm³
CadmiumContent	IEC 62321	<50 ppm
density	IEC 60811-1-3	1.44to1.50 g/cm³
ChromiumContent	IEC 62321	<100 ppm
Color A	ME12	-0.830-0.770
Color B	ME12	-1.24-0.360
Color L	ME12	26.0to27.6
MercuryContent	IEC 62321	<100 ppm
Color	ME12	OK
CadmiumContent	IEC 62321	<50 ppm
ChromiumContent	IEC 62321	<100 ppm
Color A	ME12	-0.830-0.770
Color B	ME12	-1.24-0.360
Color L	ME12	26.0to27.6
MercuryContent	IEC 62321	<100 ppm
Color	ME12	OK

Electrical performance	Test Condition	Test Method	Test Result
Volume resistivity		ASTM D257	>3.0E+14 ohms·cm
Volume resistivity	Volume resistivity		ASTM D257	>3.0E+14 ohms·cm

hardness	Test Condition	Test Method	Test Result
Shore hardness	ShoreA,15Sec	NBR7456	90to94
Shore hardness	Shore hardness	ShoreA,15Sec	NBR7456	90to94

Supplementary Information	Test Method	Test Result
Bromine Content	IEC 62321	<100 ppm
Elongation at Break	IEC 60811-1-2	<25 %
Maximum Variables	IEC 60811-1-2	<25 %
lead	IEC 62321	<100 ppm
Bromine Content	IEC 62321	<100 ppm
Elongation at Break	IEC 60811-1-2	<25 %
Maximum Variables	IEC 60811-1-2	<25 %
lead	IEC 62321	<100 ppm

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top