Phenolic PF 51 Hexion Inc.

Product Description

Certificates(0)

Datasheet

Product Description

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	7.0	kJ/m²
Charpy Notched Impact Strength	23°C	ISO 179/1eA	2.7	kJ/m²
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Compressive stress		ISO 604	250	MPa
bending strength		ISO 178	90.0	MPa
Bending modulus		ISO 178	8000	MPa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	8.0MPa,Unannealed	ISO 75-2/C	120	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate	--3	ISO 2577	0.50	%
Apparent density		ISO 60	0.60	g/cm³
density	23°C	ISO 1183	1.42	g/cm³
Shrinkage rate	--4	ISO 2577	0.55	%
Water absorption rate		ISO 62	85.0	mg
Shrinkage rate	--2	ISO 2577	0.80	%
Shrinkage rate	Shrinkage rate	--1	ISO 2577	0.45	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Compared to the anti leakage trace index	SolutionA	IEC 60112	PLC 4
Dissipation factor	100Hz	IEC 60250	0.25
Relative permittivity	100Hz	IEC 60250	16.5
Dielectric strength	1.00mm	IEC 60243-1	9.5	kV/mm
Volume resistivity		IEC 60093	1E+11	ohms·cm
Surface resistivity		IEC 60093	1E+10	ohms
hardness	Test Condition	Test Method	Test Result	Test Unit
Ball Pressure Test	H961/30	ISO 2039-1	280	MPa
Supplementary Information	Test Condition	Test Method	Test Result	Test Unit
Compression molding temperature			160to190	°C
Compression molding pressure			>15.0	MPa

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top