HDPE C513UV
0
- Properties:Good processing performancehigh environmental stress crackinghigh densityetc
- Usages:Agricultural applicationsblow molded containers
CompareTechnical Data Sheet
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D-1505 | 0.954 g/cm | |
| melt mass-flow rate | ASTM D-1238 | 6.2 g/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Environmental Stress Cracking Resistance (ESCR) | ASTM D-1693 | 2000 hr | |
| tensile strength | ASTM D-638 | 24 MPa | |
| elongation | Break | ASTM D-638 | 700 % |
| Flexural modulus | ASTM D-790 | 1070 MPa | |
| Impact strength of cantilever beam gap | ASTM D-1822 | 580 kJ/m | |
| Shore hardness | ASTM D-2240 | 61 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D-648 | 66 ℃ | |
| brittle temperature | ASTM D-746 | -75 ℃ | |
| vicat | ASTM D-1525 | 123 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top