PES S6010 BASF GERMANY

Form：Granules | Grade：Extrusion grade

Properties:

High temperature resistanFlame retardant

Typical Applications:

medical careHome appliance components

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	medical care \| Home appliance components
Properties:	High temperature resistan \| Flame retardant

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap	23°C	ISO 180	6.0	kJ/m²
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	-30°C	ISO 180	6.5	kJ/m²
Impact strength of simply supported beam without notch	23°C	ISO 179	NoBreak
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	-30°C	ISO 179	NoBreak
Charpy Notched Impact Strength	23°C	ISO 179	6.0	kJ/m²
Charpy Notched Impact Strength	Charpy Notched Impact Strength	-30°C	ISO 179	6.5	kJ/m²
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile strain	Yield,23°C	ISO 527-2	5.7	%
tensile strength	Yield,23°C	ISO 527-2	75.0	Mpa
Tensile modulus	23°C	ISO 527-2	2550	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Linear coefficient of thermal expansion	MD		5.3E-05	cm/cm/°C
Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/A	177	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	Equilibrium,23°C,50%RH	ISO 62	0.30	%
Water absorption rate	Water absorption rate	Saturation,23°C	ISO 62	0.80	%
Shrinkage rate	MD	ISO 294-4	0.72	%
Shrinkage rate	Shrinkage rate	TD	ISO 294-4	0.77	%
Melt Volume Flow Rate (MVR)	360°C/10.0kg	ISO 1133	30.0	cm3/10min
density		ISO 1183	1.23	g/cm³
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dielectric constant	100Hz	IEC 60250	3.50
Dielectric strength		IEC 60243-1	37	KV/mm
Volume resistivity		IEC 60093	>1.0E+13	ohms·cm
Surface resistivity		IEC 60093	>1.0E+15	ohms
Dissipation factor	1MHz	IEC 60250	7.1E-03
Dissipation factor	Dissipation factor	100Hz	IEC 60250	1.1E-03
Dielectric constant	1MHz	IEC 60250	3.40
hardness	Test Condition	Test Method	Test Result	Test Unit
Ball Pressure Test		ISO 2039-1	135	Mpa

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top