Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792A | 0.954 g/cm³ |
| melt mass-flow rate | | ASTMD1238 | 0.30 g/10min |
| melt mass-flow rate | | ASTMD1238 | 1.4 g/10min |
| Resistance to environmental stress cracking | | ASTMD1693 | 63.0 hr |
| hardness | Test Condition | Test Method | Test Result |
|---|
| | ASTMD2240 | 68 |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| BlowMoldingMoldTemperature | | | 15.0to40.0 |
| Blow molding temperature | | | 180to200 °C |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ASTMD638 | 27.0 Mpa |
| tensile strength | | ASTMD638 | 34.0 Mpa |
| elongation | | ASTMD638 | 740 % |
| Flexural modulus | | ASTMD790A | 1200 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTMD256 | 5.0 kJ/m² |
| Impact strength of cantilever beam gap | | ASTMD256 | 10 kJ/m² |
| Tensile impact strength | | ASTMD1822 | 200 kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| vicat | | ASTMD15252 | 127 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices