
PA66 HTNFR52G30NH NC010 DUPONT SHENZHEN
152
Form:Granules | Grade:Injection grade
Properties:
High temperature resistanFlame retardantThermal stabilityGlass fiber reinforced
Typical Applications:
Automotive sectorElectrical appliancesElectronic fieldElectrical field
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Automotive sector | Electrical appliances | Electronic field | Electrical field |
| Properties: | High temperature resistan | Flame retardant | Thermal stability | Glass fiber reinforced |
Certificates
No Data...
Technical Data Sheet
| flammability | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| FMVSS flammability | FMVSS302 | DNI | ||
| Extreme Oxygen Index | ISO 4589-2 | 37 | % | |
| Hot filament ignition temperature | 3.0mm | IEC 60695-2-13 | 775 | °C |
| 0.75mm | IEC 60695-2-13 | 725 | °C | |
| 0.40mm | IEC 60695-2-13 | 700 | °C | |
| UL flame retardant rating | 1.5mm | IEC 60695-11-10,-20 | V-0 | |
| 0.75mm | IEC 60695-11-10,-20 | V-0 | ||
| 1.5mm | UL 94 | V-0 | ||
| 0.75mm | UL 94 | V-0 | ||
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| bending strength | ISO 178 | 230 | Mpa | |
| Bending modulus | ISO 178 | 8700 | Mpa | |
| Tensile strain | Break | ISO 527-2 | 2.2 | % |
| tensile strength | Break | ISO 527-2 | 150 | Mpa |
| Tensile modulus | ISO 527-2 | 10000 | Mpa | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Hot deformation temperature | 1.8MPa,Unannealed | ISO 75-2/A | 283 | °C |
| Melting temperature | ISO 11357-3 | 310 | °C | |
| RTI Elec | 0.40mm | UL 746 | 140 | °C |
| 0.75mm | UL 746 | 140 | °C | |
| 1.5mm | UL 746 | 140 | °C | |
| 3.0mm | UL 746 | 140 | °C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Shrinkage rate | MD | ISO 294-4 | 0.30 | % |
| TD | ISO 294-4 | 1.0 | % | |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Dissipation factor | 1MHz | IEC 60250 | 0.013 | |
| 100Hz | IEC 60250 | 7E-03 | ||
| Relative permittivity | 1MHz | IEC 60250 | 4.00 | |
| 100Hz | IEC 60250 | 4.30 | ||
| Dielectric strength | IEC 60243-1 | 33 | KV/mm | |
| Volume resistivity | IEC 60093 | >1.0E+15 | ohms·cm | |
| Supplementary Information | Test Condition | Test Method | Test Result | Test Unit |
| Odor | VDA270 | 3.50 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.