ABS Novodur® HH-106
55
- Properties:heat-resisting
- Usages:Automotive interior partsElectronic fieldApplication in the automotive field
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ASTM D1238 | 7.0 g/10min | |
| Melt volume flow rate | ISO 1133 | 7.00 cm3/10min | |
| Shrinkage rate | ASTM D955 | 0.55 % | |
| ISO 294-4 | 0.40-0.70 % | ||
| Water absorption rate | ISO 62 | 0.25 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of simply supported beam without notch | ISO 179 | 100 kJ/m² | |
| ISO 179 | 190 kJ/m² |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ball-indentation hardness | ISO 2039-1 | 102 Mpa | |
| Tensile modulus | ASTM D638 | 2500 Mpa | |
| ISO 527-2 | 2400 Mpa | ||
| tensile strength | ASTM D638 | 52.0 Mpa | |
| ISO 527-2 | 51.0 Mpa | ||
| Tensile strain | ISO 527-2 | 3.0 % | |
| elongation | ASTM D638 | 3.0 % | |
| Nominal tensile fracture strain | ISO 527-2 | 9.0 % | |
| Flexural modulus | ASTM D790 | 2400 Mpa | |
| ISO 178 | 2400 Mpa | ||
| bending strength | ASTM D790 | 77.2 Mpa | |
| ISO 178 | 72.0 Mpa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Volume resistivity | ASTM D257 | >1.0E+15 ohms·cm | |
| IEC 60093 | 1E+15 ohms·cm | ||
| dielectric strength | IEC 60243-1 | 39 KV/mm | |
| Compared to the Leakage Tracking Index (CTI) | IEC 60112 | V |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Linear coefficient of thermal expansion | ISO 11359-2 | 9E-05 cm/cm/°C | |
| thermal conductivity | DIN 52612 | 0.17 W/m/K | |
| maximum service temperature | 85 °C | ||
| Heat distortion temperature | ISO 75-2/B | 107 °C | |
| ISO 75-2/A | 99.0 °C | ||
| vicat | ISO 306/A50 | 115 °C | |
| ISO 306/B50 | 106 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top