PPO(PPE)+TPE NORYL™ WCD815U resin SABIC

0

Technical Data Sheet

physical property Test ConditionTest MethodTest Result
densityASTM D7921.03 g/cm³
melt mass-flow rateASTM D123810 g/10min
hardnessTest ConditionTest MethodTest Result
Shore hardnessASTM D224081
flammabilityTest ConditionTest MethodTest Result
Hot filament ignition temperatureIEC 60695-2-13775 °C
Limiting Oxygen IndexISO 4589-227 %
VWUL 1581Pass
Smoke densityASTME662120
Smoke densityASTME662170
Burning wire flammability indexIEC 60695-2-12850 °C
Mechanical propertiesTest ConditionTest MethodTest Result
tensile strength BreakISO 527-2/5017.0 MPa
elongationBreakUL 1581330 %
elongationASTM D638250 %
elongationUL 1581290 %
elongationBreakISO 527-2/50260 %
Flexural modulusASTM D79027.0 MPa
Flexural modulusISO 17825.0 MPa
tensile strength BreakUL 158122.0 MPa
tensile strength ASTM D63815.0 MPa
tensile strength UL 158123.0 MPa
Electrical performanceTest ConditionTest MethodTest Result
Volume resistivityASTM D2575.1E+15 ohms·cm
dielectric strengthASTM D14925 kV/mm
dielectric constant内部方法2.60
Dissipation Factor内部方法2E-03
Compared to the Leakage Tracking Index (CTI)IEC 60112PLC 0
Surface ResistivityASTM D2571.6E+16 ohms
Thermal performanceTest ConditionTest MethodTest Result
Heat distortion temperatureUL 158110 %
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Contact Us

Get App

Top