Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ISO1183 | 1.23 g/cm³ |
| Melt volume flow rate | | ISO1133 | 40.0 cm3/10min |
| Shrinkage rate | | ISO294-4 | 0.74 % |
| Shrinkage rate | | ISO294-4 | 0.70 % |
| Water absorption rate | | ISO62 | 0.80 % |
| Water absorption rate | | ISO62 | 0.30 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| | ISO2039-1 | 135 Mpa |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | HB |
| UL flame retardant rating | | UL94 | HB |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ISO527-2 | 2550 Mpa |
| Tensile stress | | ISO527-2 | 75.0 Mpa |
| Tensile strain | | ISO527-2 | 6.0 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Charpy Notched Impact Strength | | ISO179 | 6.0 kJ/m² |
| Charpy Notched Impact Strength | | ISO179 | 5.5 kJ/m² |
| Impact strength of simply supported beam without notch | | ISO179 | NoBreak |
| Impact strength of simply supported beam without notch | | ISO179 | NoBreak |
| Impact strength of cantilever beam gap | | ISO180 | 6.0 kJ/m² |
| Impact strength of cantilever beam gap | | ISO180 | 5.5 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| dielectric strength | | IEC60243-1 | 37 KV/mm |
| dielectric constant | | IEC60250 | 3.10 |
| dielectric constant | | IEC60250 | 3.10 |
| Dissipation Factor | | IEC60250 | 8E-04 |
| Dissipation Factor | | IEC60250 | 6.4E-03 |
| CTI | | IEC60112 | 125 V |
| Surface Resistivity | | IEC60093 | >1.0E+15 ohms |
| Volume resistivity | | IEC60093 | >1.0E+13 ohms·cm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ISO75-2/A | 177 °C |
| | | 5.3E-05 cm/cm/°C |
| RTI Elec | | UL746 | 155 °C |
| RTI Elec | | UL746 | 155 °C |
| RTI Imp | | UL746 | 130 °C |
| RTI Imp | | UL746 | 130 °C |
| RTI Str | | UL746 | 155 °C |
| RTI Str | | UL746 | 155 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices