HMW-HDPE Jamplast JPHDPEHMW Jamplast, Inc.
0
- Properties:physical property
- Usages:Sheet materialsblow molding applicationsautomotive applicationsfuel tanks
Technical Data Sheet
Test Condition | Test Method | Test Result | |
---|---|---|---|
melt mass-flow rate | ASTM D1238 | 10 g/10min | |
brittle temperature | ASTM D746 | -76.1 °C | |
vicat | ASTM D1525 | 121 °C | |
Linear coefficient of thermal expansion | ASTM D696 | 1.2E-04 cm/cm/°C | |
density | ASTM D1505 | 0.949 g/cm³ | |
melt mass-flow rate | ASTM D1238 | 0.10 g/10min | |
Environmental stress cracking resistance | ASTM D1693B | 800 hr | |
tensile strength | ASTM D638 | 26.2 MPa | |
elongation | ASTM D638 | 1000 % | |
Flexural modulus | ASTM D790A | 1240 MPa | |
Impact strength of cantilever beam gap | ASTM D1822 | 210 kJ/m² | |
ASTM D1822 | 252 kJ/m² | ||
Heat distortion temperature | ASTM D648 | 71.1 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top