NBR NANCAR® 1965 Nantex Industry Co., Ltd.

Product Description

Certificates(0)

Datasheet

Product Description

Certificates

No Data...

Technical Data Sheet

elastomer	Test Condition	Test Method	Test Result	Test Unit
tensile strength	Yield2	ASTM D412	25.5	MPa
	tensile strength	Yield3	ASTM D412	26.2	MPa
	tensile strength	tensile strength	Yield4	ASTM D412	25.6	MPa
elongation	Break5	ASTM D412	640	%
	elongation	Break6	ASTM D412	620	%
	elongation	elongation	Break7	ASTM D412	590	%
tear strength		ASTM D624	58.8	kN/m
Permanent compression deformation	100°C,70hr	ASTM D395	54	%
tensile strength	300%Strain7	ASTM D412	8.63	MPa
	tensile strength	300%Strain5	ASTM D412	7.85	MPa
	tensile strength	tensile strength	300%Strain6	ASTM D412	8.34	MPa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Heat loss		ASTM D5688	0.30	%
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density			0.940	g/cm³
Mooney viscosity	ML1+4,100°C	ASTM D1646	63	MU
bound acrylonitrile content		Internal Method	20.0	%
stabilizer			Non-staining
Soluble inMEK			100	%
hardness	Test Condition	Test Method	Test Result	Test Unit
Shore hardness	ShoreA2	ASTM D2240	67
	Shore hardness	ShoreA3	ASTM D2240	68
	Shore hardness	Shore hardness	ShoreA4	ASTM D2240	69
aging	Test Condition	Test Method	Test Result	Test Unit
Volume change	100°C,70hr,ASTM标准油（1号）	ASTM D471	4.2	%
Volume change	Volume change	100°C,70hr,ASTM标准油（3号）	ASTM D471	51	%
Change rate of tensile strength in air	100°C,70hr	ASTM D865	-29	%
Change rate of ultimate elongation in air	100°C,70hr	ASTM D865	-52	%
Change rate of hardness (Shore) in the air	ShoreA,100°C,70hr	ASTM D865	5.0
Change rate of tensile strength in air	100°C,70hr,在ASTM#1油中	ASTM D471	-23	%
Change rate of tensile strength in air	Change rate of tensile strength in air	100°C,70hr,在ASTM#3油中	ASTM D471	-58	%
Change rate of ultimate elongation in air	100°C,70hr,在ASTM#1油中	ASTM D471	-32	%
Change rate of ultimate elongation in air	Change rate of ultimate elongation in air	100°C,70hr,在ASTM#3油中	ASTM D471	-44	%
Change rate of hardness (Shore) in the air	支撐A,100°C,70hr,在ASTM#1油中	ASTM D471	-3.0
Change rate of hardness (Shore) in the air	Change rate of hardness (Shore) in the air	支撐A,100°C,70hr,在ASTM#3油中	ASTM D471	-25

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top