
Phenolic 118 (Injection) SBHPP
Product Description
Certificates(0)
Datasheet
Product Description
Certificates
No Data...
Technical Data Sheet
| impact performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Impact strength of cantilever beam gap | Compression Molded | ASTM D256 | 18 | J/m |
| flammability | Test Condition | Test Method | Test Result | Test Unit |
| UL flame retardant rating | 6.10mm | UL 94 | V-0 | |
| 3.15mm | UL 94 | V-1 | ||
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| tensile strength | Yield,Compression Molded | ASTM D638 | 55.2 | MPa |
| Tensile modulus | Compression Molded | ASTM D638 | 9650 | MPa |
| compressive strength | ASTM D695 | 207 | MPa | |
| bending strength | Compression Molded | ASTM D790 | 82.7 | MPa |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Hot deformation temperature | 1.8MPa,Unannealed,Compression Molded | ASTM D648 | 171 | °C |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Water absorption rate | 24hr | ASTM D570 | 0.50 | % |
| Shrinkage rate | MD:Compression Molded | ASTM D955 | 0.70to1.1 | % |
| ASTM D1895 | 2.4 | |||
| Apparent density | ASTM D1895 | 0.58 | g/cm³ | |
| density | ASTM D792 | 1.40 | g/cm³ | |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Dielectric strength | ASTM D149 | 16 | kV/mm | |
| Volume resistivity | ASTM D257 | 1E+12 | ohms·cm |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.