Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792 | 1.11 g/cm³ |
| melt mass-flow rate | | ASTMD1238 | 6.0 g/10min |
| Shrinkage rate | | 内部方法 | 0.40 % |
| Water absorption rate | | ASTMD570 | 0.020 % |
| Ash Content | | 内部方法 | 30 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | HB |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | Break | ASTMD638 | 60.0 MPa |
| Flexural modulus | | ASTMD790 | 5000 MPa |
| bending strength | | ASTMD790 | 100 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Charpy Notched Impact Strength | | ISO179/1eA | 18 kJ/m² |
| Impact strength of cantilever beam gap | | ASTMD256 | 150 J/m |
| Impact strength of cantilever beam gap | | ASTMD256 | 210 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Surface Resistivity | | ASTMD257 | 1E+15 ohms |
| dielectric constant | | ASTMD150 | 2.50 |
| CTI | | IEC60112 | 650 V |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ASTMD648 | 142 °C |
| | ASTMD696 | 6.5E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare