Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792B | 1.30到1.32 g/cm³ |
| melt mass-flow rate | | ASTMD1238 | 10到15 g/10min |
| Colorb | | GB/T14190 | 2.00到6.00 |
| ColorL | | GB/T14190 | >90.0 |
| ParticleMass | | GB/T14190 | 2.00到2.40 g/100pcs |
| intrinsic viscosity | | GB/T14190 | 1.1到1.4 dl/g |
| water content | | GB/T14190 | <0.40 % |
| Ash Content | | GB/T14190 | <300 mg/kg |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| CarboxylEndGroups | | GB/T14190 | <30.0 mol/t |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTMD256A | >40.0 kJ/m² |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ASTMD638 | 50.0到60.0 MPa |
| elongation | Break | ASTMD638 | >250 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| dielectric strength | | ASTMD149 | >2.0 kV/mm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ASTMD3418 | >222 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare