ABS TRE35
0
- Usages:Pipeline systemsheetsprofiles
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO 1183 | 1.05 g/cm3 | |
| melt mass-flow rate | ISO 1133 | 5.0 g/10 min | |
| Shrinkage rate | 0.40 to 0.60 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Flexural modulus | ISO 178 | 2300 MPa | |
| Impact strength of cantilever beam gap | ASTM D256 | 35 kJ/m2 | |
| ball-indentation hardness | ISO 2039-1 | 90.0 MPa | |
| tensile strength | Yield | ISO 527-2 | 45.0 MPa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Surface Resistivity | IEC 60093 | 1E+16 ohm | |
| Compared to the Leakage Tracking Index (CTI) | IEC 60112 | PLC 0 | |
| dielectric strength | IEC 60243-1 | >25 kV/mm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ISO 75-2/B | 96.0 ℃ | |
| vicat | ISO 306/B50 | 99.0 ℃ | |
| UL flame retardant rating | UL 94 | HB |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top