Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Moisture content | | ISO960 | <1000 ppm |
| density | | ISO1183 | 1.13 g/cm³ |
| melt mass-flow rate | | ISO1133 | 8.0到12 g/10min |
| Water absorption rate | | ISO62 | 0.050 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| Hot filament ignition temperature | | IEC60695-2-13 | 650 °C |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ISO527-2/5 | 2800 MPa |
| Tensile stress | | ISO527-2/5 | 25.0 MPa |
| Tensile strain | | ISO527-2/5 | 15 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ISO180/1A | 4.0 kJ/m² |
| Impact strength of cantilever beam gap | | ISO180/1A | 8.0 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| CTI | | IEC60112 | 450 V |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| melting temperature | | ISO11357 | 165 °C |
| | ISO75-2/B | 108 °C |
| vicat | | ISO306/B | 68.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare