
PPS GM-70 TOSOH JAPAN
123
Form:Granules
Properties:
High temperature resistancurrencystandard
Typical Applications:
Electrical fieldElectronic fieldHousehold appliancesHousehold appliancesFlame retardant insulationBottle capCasters
Product Description
Certificates(1)
Datasheet
Product Description
| Typical Applications: | Electrical field | Electronic field | Household appliances | Household appliances | Flame retardant insulation | Bottle cap | Casters |
| Properties: | High temperature resistan | currency | standard |
Certificates

Technical Data Sheet
| machinability | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Shrinkage rate | Across Flow | ASTM D-955 | 0.6 | % |
| 机械方向 | ASTM D-955 | 0.3 | % | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| elongation | ASTM D-638 | 0.4 | % | |
| Tensile modulus | ASTM D-790 | 21(2.1) | ||
| bending strength | ASTM D-790 | 206(2100) | MPa(Kg/cm2) | |
| Rockwell hardness | ASTM D-785 | 122 | Rscal | |
| tensile strength | ASTM D-638 | 108(1100) | MPa(Kg/cm2) | |
| Impact strength of cantilever beam gap | Unnotched | ASTM D-256 | 137(14) | J/m(kg.cm/cm) |
| Notched | ASTM D-256 | 59(6) | J/m(kg.cm/cm) | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Hot deformation temperature | 18.6kg/cm2 | ASTM D-648 | >260 | °C |
| Linear coefficient of thermal expansion | 0.51(0.44) | W/M.K(kcal/m.hr.℃) | ||
| Tosoh Method | 2.6 | |||
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Dielectric strength | ASTM D-149 | 12 | KV/mm | |
| Dissipation factor | 1MHz | ASTM D-150 | 0.0015 | |
| Dielectric constant | 1MHz | ASTM D-150 | 5.4 | |
| Volume resistivity | ASTM D-257 | 1×1016 | Ω.cm |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.