ABS 1725
39
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Specific gravity | ASTM D792 | 1.05 | |
| Molding shrinkage rate | ASTM D955 | 0.4-0.7 % | |
| Melt flow rate | ASTM D1238 | 25 g/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile strength | ASTM D638 | 430 kg/cm2 | |
| Tensile elongation | ASTM D638 | 32 % | |
| Bending strength | ASTM D790 | 575 kg/cm2 | |
| Bending modulus | ASTM D790 | 21300 kg/cm2 | |
| ASTM D785 | 110 |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256 | 15 kJ/m² | |
| ASTM D256 | 15 kJ/m² | ||
| ASTM D256 | 14 kJ/m² | ||
| ASTM D256 | 14 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Compared to the leakage trace index | IEC 60112 | 1 V | |
| Arc resistance | ASTM D495 | 6 ohm.cm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Hot deformation temperature | ASTM D648 | 82 °C | |
| ASTM D648 | 86 °C | ||
| ASTM D1525 | 97 °C | ||
| Flammability | UL94 | HB | |
| Relative temperature index | UL-746B | 60 °C | |
| UL-746B | 60 °C | ||
| UL-746B | 60 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top