PP EPT30R
0
- Properties:Suitable processing form and injection
- Usages:Car steering wheelfurniture
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ASTM D-1238 | 3.5 g/10min | |
| spiral flow length | MA18544 | 520 mm | |
| elongation | ASTM D-638 | 12 % | |
| density | ASTM D-1505 | 0.9 g/cm |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Flexural modulus | MA17074 | 1280 MPa | |
| tensile strength | ASTM D-638 | 28 MPa | |
| Impact strength of cantilever beam gap | ASTM D-256 | 150 J/m | |
| Rockwell hardness | ASTM D-785 | 81 R | |
| Impact strength of cantilever beam gap | ASTM D-256 | 49 J/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| vicat | ASTM D-1525 | 150 ℃ | |
| Heat distortion temperature | ASTM D-648 | 85 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top