HIPS 175K
0
- Properties:High impacthigh flow
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Moulding shrinkage | 0.4-0.6 % |
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | 1.05 g/cm | ||
| melt mass-flow rate | 4 g/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | 30.6 MPa | ||
| elongation at yield | 3 % | ||
| elongation | Break | 40 % | |
| Flexural modulus | 2142 MPa | ||
| Izod notched impact strength | 8.2 KJ/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| dielectric constant | 2.5 | ||
| Volume resistivity | ＞10 Ω·cm | ||
| Surface Resistivity | ＞10 Ω | ||
| dielectric strength | 200 KV/mm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| linear expansion coefficient | 9 10 | ||
| 76 ℃ | |||
| vicat | 89 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top