PP AW564 TPC SINGAPORE

103

Form：Granules | Grade：Injection grade

Properties:

High impact resistanceHigh rigidityMiddle flowImpact copolymer

Typical Applications:

Thin-walled containerHome appliance componentsToyLoading boxElectrical fieldElectronic field

Supplier(1)

Product Description

Certificates(1)

Datasheet

Alternative Model(3)

Product Description

Typical Applications:	Thin-walled container \| Home appliance components \| Toy \| Loading box \| Electrical field \| Electronic field
Properties:	High impact resistance \| High rigidity \| Middle flow \| Impact copolymer

Certificates

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap	-20°C	ASTM D256	45	J/m
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	23°C	ASTM D256	92	J/m
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating		UL 94	HB
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength	Yield	ASTM D638	27.5	Mpa
tensile strength	tensile strength	Break	ASTM D638	23.0	Mpa
elongation	Break	ASTM D638	300	%
Bending modulus		ASTM D790	1290	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45MPa,Unannealed	ASTM D648	124	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ASTM D792	0.900	g/cm³
melt mass-flow rate		ASTM D1238	9.0	g/10min
Shrinkage rate	MD:2.00mm	Internal Method	1.6	%
Shrinkage rate	Shrinkage rate	TD:2.00mm	Internal Method	1.7	%
hardness	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness	R-Scale	ASTM D785	91

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top