LDPE UBE J5019
60
Compare
View PricesTechnical Data Sheet
| other | Test Condition | Test Method | Test Result |
|---|---|---|---|
| characteristic | 注塑塑料花 | ||
| Color | 透明本色 |
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ASTM D-1238 | 50 g/10min | |
| density | ASTM D-1505 | 0.918 kg/m3 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | ASTM D-638 | 8 Mpa | |
| Shore hardness | ASTM D-2240 | 45 Shore D | |
| elongation at break | ASTM D-638 | 250 % | |
| bending strength | ASTM D-727 | 110 Mpa | |
| elongation at break | ASTM D638/ISO 527 | 250 % | |
| tensile strength | ASTM D638/ISO 527 | 8 kg/cm²(MPa)[Lb/in²] | |
| bending strength | ASTM D790/ISO 178 | 110 kg/cm²(MPa)[Lb/in²] |
| Physical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D792/ISO 1183 | 0.918 | |
| melt mass-flow rate | ASTM D1238/ISO 1133 | 50 g/10min |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| vicat | ASTM D-1525 | 78 °C | |
| brittle temperature | ASTM D-746 | -30 °C | |
| Heat distortion temperature | ASTM D648/ISO 75 | 78 ℃（℉） | |
| vicat | ASTM D1525/ISO R306 | 78 ℃（℉） |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top