PC 500ECR-BK 1D152L SABIC INNOVATIVE NANSHA

Form：Granules | Grade：Injection grade

Properties:

enhanceFlame retardantGlass fiber reinforced

Typical Applications:

Household appliancesAutomotive sector

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Household appliances \| Automotive sector
Properties:	enhance \| Flame retardant \| Glass fiber reinforced

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Charpy Notched Impact Strength		ASTM D256/ISO 179	kg·cm/cm(J/M)ft·lb/in	44565
Impact strength of cantilever beam gap		ASTM D256/ISO 179	kg·cm/cm(J/M)ft·lb/in	缺口：2.5
	Impact strength of cantilever beam gap		ASTM D256/ISO 179	kg·cm/cm(J/M)ft·lb/in	缺口：1.9
	Impact strength of cantilever beam gap	Impact strength of cantilever beam gap		ASTM D256/ISO 179	kg·cm/cm(J/M)ft·lb/in	44570
Elongation at Break		ASTM D638/ISO 527		%
machinability	Test Condition	Test Method	Test Result	Test Unit
Processing temperature			℃	518-572
	Processing temperature			℃	554-608
	Processing temperature	Processing temperature			℃	536-590
Mold temperature			℃	176-248
Melt Temperature			℃	554-608
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus		ASTM D638/ISO 527	kg/cm²(MPa)[Lb/in²]	479000
tensile strength		ASTM D638/ISO 527	kg/cm²(MPa)[Lb/in²]	8270/6960
elongation		ASTM D638/ISO 527		%
Bending modulus		ASTM D790/ISO 178	kg/cm²(MPa)[Lb/in²]	453000（493000）
bending strength		ASTM D790/ISO 178	kg/cm²(MPa)[Lb/in²]	1360（13800）
thermal properties	Test Condition	Test Method	Test Result	Test Unit
Vicat softening temperature		ASTM D1525/ISO R306	℃（℉）	309
Linear coefficient of thermal expansion		ASTM D696/ISO 11359	mm/mm.℃	0.000026－0.000047
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate		ASTM D955	0.4－0.6	%
melt mass-flow rate		ASTM D1238/ISO 1133	g/10min	300℃/1.2kg,7.5
Water absorption rate		ASTM D570/ISO 62	0.31	%
Electrical Property	Test Condition	Test Method	Test Result	Test Unit
Surface resistivity		ASTM D257/IEC 60093	Ω	>1.0E+15 ohms
Volume resistivity		ASTM D257/IEC 60093	Ω.cm	>1.0E+15 ohm.cm

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top