TPU 2103-90AE
33
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ASTM D1238 | 7.0 g/10min | |
| Shrinkage rate | ASTM D955 | 0.40-0.60 % | |
| ASTM D955 | 0.50-0.70 % |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shore hardness | ASTM D2240 | 47 | |
| ASTM D2240 | 90 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Flexural modulus | ASTM D790 | 65.9 Mpa | |
| Taber abraser | ASTM D1044 | 50.0 mg |
| elastomer | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | ASTM D412 | 6.30 Mpa | |
| ASTM D412 | 9.70 Mpa | ||
| ASTM D412 | 17.9 Mpa | ||
| ASTM D412 | 38.2 Mpa | ||
| elongation | ASTM D412 | 530 % | |
| tear strength | ASTM D624 | 133 kN/m | |
| compression set | ASTM D395B | 25 % | |
| ASTM D395B | 40 % |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Glass Transition Temperature | DSC | -34.0 °C | |
| vicat | ASTM D15252 | 90.6 °C | |
| Linear coefficient of thermal expansion | ASTM D696 | 1.6E-04 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top