
POE 5101 EXXONMOBIL USA
173
Form:Granules | Grade:Enhanced level
Properties:
High rigidityenhanceToughening
Typical Applications:
Fitness equipment
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Fitness equipment |
| Properties: | High rigidity | enhance | Toughening |
Certificates
No Data...
Technical Data Sheet
| Other performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Environmental stress cracking resistance | ASTM D-1693 | >1000 | hr | |
| Basic Performance | Test Condition | Test Method | Test Result | Test Unit |
| turbidity | ASTM D-1003 | 80@50mil | % | |
| Mooney viscosity ML (1+4) | 125℃ | ASTM D-1646 | 18 | Torgue Units |
| Shore hardness | Shore A,15 sec | ASTM D-2240 | 90 | |
| melt mass-flow rate | ExxonMobil Method | 1.1 | g/10 min | |
| Shore hardness | Shore D,15 sec | ASTM D-2240 | 34 | |
| density | ExxonMobil Method | 0.902 | ||
| melt mass-flow rate | ExxonMobil Method | 2.0 | g/10 min | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Maximum melt temperature | ExxonMobil Method | 209(98) | ℉(℃) | |
| Vicat softening temperature | 200g | ASTM D-1525 | 209(98) | ℉(℃) |
| 1000g | ASTM D-1525 | 192(89) | ℉(℃) | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Bending modulus | 1% secant | ASTM D-790 | 12731(88) | Psi(MPa) |
| tensile strength | @Break | ASTM D-638 | >3000(>21) | Psi(MPa) |
| ASTM D-624 | 487(86) | lb/in(kN/m) | ||
| Elongation at Break | @Break | ASTM D-638 | >2000(No Break) | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.