
PBT 4830 NCB2 TAIWAN CHANGCHUN
261
Form:Granules
Properties:
Glass fiber reinforcedhigh strengthFlame retardant
Typical Applications:
Automotive sectorSwitch panelLaptop case
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Automotive sector | Switch panel | Laptop case |
| Properties: | Glass fiber reinforced | high strength | Flame retardant |
Certificates
No Data...
Technical Data Sheet
| Basic Performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Water absorption rate | ASTM D570 | 0.03 | % | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Shore hardness | ASTM D785 | 121 | R | |
| bending strength | ASTM D790 | 1750 | kg/cm | |
| Bending modulus | ASTM D790 | 85000 | kg/cm | |
| Impact strength of cantilever beam gap | ASTM D256 | 8.7 | kg.cm/cm | |
| Elongation at Break | ASTM D638 | 3.5 | % | |
| tensile strength | ASTM D638 | 1240 | kg/cm | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Flame resistance | UL 94 | V-0 | ||
| Hot deformation temperature | 18.6kg/cm | ASTM D648 | 200(218) | °C |
| Linear coefficient of thermal expansion | ASTM D696 | 3 | ||
| Melting temperature | DSC | 225 | °C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Fiberglass content | 30 | % | ||
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Volume resistivity | ASTM D257 | 10 | Ω.cm | |
| Surface resistivity | ASTM D257 | 10 | Ω | |
| Dielectric strength | ASTM D149 | 22 | KV/mm | |
| Charged positive electrode | 60Hz | ASTM D150 | 0.001 | |
| Arc resistance | ASTM D495 | 90 | sec | |
| Transmittance rate | 60Hz | ASTM D150 | 3.5 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.