
PA6 6 DSC101R DESCO Co., Ltd.
Product Description
Certificates(0)
Datasheet
Product Description
Certificates
No Data...
Technical Data Sheet
| impact performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256 | 49 | J/m | |
| flammability | Test Condition | Test Method | Test Result | Test Unit |
| UL flame retardant rating | UL 94 | HB | ||
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| bending strength | ASTM D790 | 118 | MPa | |
| Bending modulus | ASTM D790 | 2940 | MPa | |
| elongation | Break | ASTM D638 | 30 | % |
| tensile strength | ASTM D638 | 83.4 | MPa | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Melting temperature | DSC | 220 | °C | |
| Hot deformation temperature | 1.8MPa,Unannealed | ASTM D648 | 65.0 | °C |
| 0.45MPa,Unannealed | ASTM D648 | 185 | °C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| density | ASTM D792 | 1.14 | g/cm³ | |
| Water absorption rate | 23°C,24hr | ASTM D570 | 1.7 | % |
| Shrinkage rate | MD | 0.90to1.3 | % | |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Dielectric strength | ASTM D149 | 19 | kV/mm | |
| Volume resistivity | ASTM D257 | 1.0E+12到1.0E+14 | ohms·cm | |
| Arc resistance | ASTM D495 | 195 | sec | |
| Dielectric constant | 1MHz | ASTM D150 | 3.00 | |
| hardness | Test Condition | Test Method | Test Result | Test Unit |
| Rockwell hardness | R-Scale | ASTM D785 | 120 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.