TPU Desmopan® 9380A
150
- Properties:Hydrolysis resistanceAntimicrobialFlexibility at low temper
- Usages:Cable sheathpipeline
Compare
View PricesTechnical Data Sheet
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shore hardness | ISO 7619 | 80 | |
| ISO 7619 | 31 | ||
| ISO 8683 | 80 | ||
| ISO 8683 | 31 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | DIN 53504 | 39.9 Mpa | |
| DIN 53504 | 1.40 Mpa | ||
| DIN 53504 | 3.90 Mpa | ||
| DIN 53504 | 5.20 Mpa | ||
| DIN 53504 | 9.40 Mpa | ||
| Tensile strain | DIN 53504 | 590 % | |
| Tensile storage modulus | ISO 6721 | 73.0 Mpa | |
| ISO 6721 | 37.0 Mpa | ||
| ISO 6721 | 30.0 Mpa | ||
| wear resistance | ISO 4649 | 20.0 mm³ |
| squeeze out | Test Condition | Test Method | Test Result |
|---|---|---|---|
| drying temperature | < 80 °C | ||
| Melt Temperature | 195 to 215 °C |
| elastomer | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tear strength | ISO 34-1 | 50 kN/m | |
| compression set | ISO 815 | 25 % | |
| ISO 815 | 37 % | ||
| ISO 815 | 25 % | ||
| Resilience | ISO 4662 | 50 % |
| injection | Test Condition | Test Method | Test Result |
|---|---|---|---|
| drying temperature | < 80 °C | ||
| Processing (melt) temperature | 205 to 225 °C | ||
| Temperature | 20 to 40 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top