PA12 MV1074 SA01 ARKEMA FRANCE

Form：Granules | Grade：Medical grade

Properties:

Low wear

Typical Applications:

Medical and nursing supplies

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Medical and nursing supplies
Properties:	Low wear

Certificates

No Data...

Technical Data Sheet

optical performance	Test Condition	Test Method	Test Result	Test Unit
Refractive index		Internal Method	1.502
impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	无断裂
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	无断裂
flammability	Test Condition	Test Method	Test Result	Test Unit
Extreme Oxygen Index		ISO 4589-2	19	%
squeeze out	Test Condition	Test Method	Test Result	Test Unit
drying temperature			65 to 75	°C
drying time			4.0 to 6.0	hr
Melt Temperature			210 to 230	°C
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus		ISO 527-2	97.0	Mpa
tensile strength	Break	ISO 527-2	30.0	Mpa
tensile strength	tensile strength	50% Strain	ISO 527-2	10.0	Mpa
Tensile strain	Break	ISO 527-2	> 50 > 300	%
injection	Test Condition	Test Method	Test Result	Test Unit
drying temperature			65 to 75	°C
drying time			4.0 to 6.0	hr
Processing (melt) temperature			200 to 270	°C
Mold temperature			25 to 60	°C
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Glass transition temperature		ISO 11357-2	-40.0	°C
Melting temperature		ISO 11357-3	158	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	Equilibrium, 23°C, 50% RH	ISO 62	1.4	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Surface resistivity		IEC 60093	--	ohms
Volume resistivity		IEC 60093	1.5E+11	ohms·cm
Dielectric strength		IEC 60243-1	5.0	KV/mm
hardness	Test Condition	Test Method	Test Result	Test Unit
Shore hardness	Shore D, 15 Sec	ISO 868	40
film	Test Condition	Test Method	Test Result	Test Unit
tensile strength	MD : Break	ISO 527-3	32.0	Mpa
tensile strength	tensile strength	TD : Break	ISO 527-3	34.0	Mpa
elongation	MD : Break	ISO 527-3	500	%
elongation	elongation	TD : Break	ISO 527-3	700	%

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top