PA66 A3 GF50 NC NILIT SUZHOU

Form：Granules

Properties:

enhance

Typical Applications:

Automotive sectorElectronic and Electrical ApplicationsHome Furnishings

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Automotive sector \| Electronic and Electrical Applications \| Home Furnishings
Properties:	enhance

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	48	kJ/m²
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	55	kJ/m²
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	0.8 mm	UL 94	V-0
	UL flame retardant rating	1.6 mm	UL 94	V-0
	UL flame retardant rating	UL flame retardant rating	3.2 mm	UL 94	V-0
Burning wire flammability index	0.8 mm	IEC 60695-2-12	960	°C
Burning wire flammability index	Burning wire flammability index	3.2 mm	IEC 60695-2-12	960	°C
Hot filament ignition temperature	0.8 mm	IEC 60695-2-13	775	°C
Hot filament ignition temperature	Hot filament ignition temperature	3.2 mm	IEC 60695-2-13	825	°C
Extreme Oxygen Index		ISO 4589-2	31	%
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus	23°C	ISO 527-2	15000	Mpa
tensile strength	Yield, 23°C	ISO 527-2	210	Mpa
Tensile strain	Break, 23°C	ISO 527-2	1.5	%
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45 MPa, Unannealed	ISO 75-2/B	261	°C
Hot deformation temperature	Hot deformation temperature	1.8 MPa, Unannealed	ISO 75-2/A	255	°C
Continuous use temperature		IEC 60216	125	°C
Ball Pressure Test	125°C	IEC 60695-10-2	通过
Ball Pressure Test	Ball Pressure Test	165°C	IEC 60695-10-2	通过
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate	横向Flow : 23°C	ISO 294-4	0.50	%
Shrinkage rate	Shrinkage rate	Flow : 23°C	ISO 294-4	0.30	%
Water absorption rate	24 hr, 23°C	ISO 62	0.50	%
Water absorption rate	Water absorption rate	Saturation, 23°C	ISO 62	2.5	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Surface resistivity		IEC 60093	1.0E+13	ohms
Volume resistivity	23°C	IEC 60093	1.0E+15	ohms·cm
Dielectric strength	2.00 mm	IEC 60243-1	21	KV/mm
Compared to the anti leakage trace index	3.20 mm, Solution A	IEC 60112	PLC 0
Needle flame test	1.00 mm	IEC 60695-11-5	通过
Needle flame test	Needle flame test	2.00 mm	IEC 60695-11-5	通过

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top