PA6 B3 black(2502) AKRO-PLASTIC GERMANY

Form：Granules | Color：black | Grade：Demoulding grade

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Color:

black

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of simply supported beam without notch	23°C		无断裂
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	-30°C		无断裂	--
flammability	Test Condition	Test Method	Test Result	Test Unit
Hot filament ignition temperature	(1.6 mm)	°C	675	--
Burning wire flammability index	(1.6 mm)	°C	750	--
UL flame retardant rating	1.6mm		V-2	--
Burning rate	(> 1.00 mm)	mm/min	< 100	--
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
bending strength		MPa	120	--
Bending modulus		MPa	3100	--
Tensile stress (yield)		MPa	85	45
Tensile modulus		MPa	3600	1200
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Melting temperature		°C	220	--
Hot deformation temperature	1.8 MPa, Unannealed	°C	60	--
Hot deformation temperature	Hot deformation temperature	0.45 MPa, Unannealed	°C	180	--
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Humidity Absorption - 62% RH	(70°C)	%	2.6 to 3.4	--
Water absorption rate	(Saturation, 23°C)	%	9.0 to 10	--
flow		%	1.1	--
vertical		%	1	--
density	23°C	g/cm³	1.13	--
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Leakage Traceability Index (Solution A)		V	600	--
Volume resistivity		ohms·cm	10000000000000	10000000000
Surface resistivity		ohms	1000000000000	10000000000

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top