Technical Data Sheet
other | Test Condition | Test Method | Test Result |
---|
characteristic | | | 电气工程、家用产品 |
Color | | | 透明 |
optical performance | Test Condition | Test Method | Test Result |
---|
transmittance | | ASTM D1003/ISO 13468 | 89 % |
refractive index | | ASTM D542/ISO 489 | 1.586 |
Mechanical properties | Test Condition | Test Method | Test Result |
---|
Charpy Notched Impact Strength | | ASTM D256/ISO 179 | N kg·cm/cm(J/M)ft·lb/in |
Impact strength of cantilever beam gap | | ASTM D256/ISO 179 | 80P(C) kg·cm/cm(J/M)ft·lb/in |
Tensile modulus | | ASTM D638/ISO 527 | 2400 kg/cm²(MPa)[Lb/in²] |
Flexural modulus | | ASTM D790/ISO 178 | 66 kg/cm²(MPa)[Lb/in²] |
elongation at break | | ASTM D638/ISO 527 | >50 % |
Electrical performance | Test Condition | Test Method | Test Result |
---|
Surface Resistivity | | ASTM D257/IEC 60093 | 1E16 Ω |
dielectric constant | | ASTM D150/IEC 60250 | 3.1 |
dielectric constant | | ASTM D150/IEC 60250 | 3.0 |
arc resistance | | ASTM D495/IEC 60112 | 275 |
Volume resistivity | | ASTM D257/IEC 60093 | 1E14 Ω.cm |
Dielectric loss | | ASTM D150/IEC 60250 | 5 |
Dielectric loss | | ASTM D150/IEC 60250 | 90 |
Physical properties | Test Condition | Test Method | Test Result |
---|
density | | ASTM D792/ISO 1183 | 1.2 |
Water absorption rate | | ASTM D570/ISO 62 | 0.3 % |
Thermal performance | Test Condition | Test Method | Test Result |
---|
Heat distortion temperature | | ASTM D648/ISO 75 | 124 ℃(℉) |
Heat distortion temperature | | ASTM D648/ISO 75 | 137 ℃(℉) |
vicat | | ASTM D1525/ISO R306 | 144 ℃(℉) |
Linear coefficient of thermal expansion | | ASTM D696/ISO 11359 | 0.65 mm/mm.℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.